[vc_row][vc_column][vc_column_text]

Water penetration testing machine

 

Stainless steel tank
Has a disconnected and connected water flow valve
Has pipe fittings in accordance with standard
Has a level control mechanism
10 output numbers according to customer’s order
Compliant with IEC794-1-F5 standard
9 output in accordance with Method B
Output in accordance with Method A
Meets IEC 60794 standardIEC 60794

[/vc_column_text][vc_separator color=”juicy_pink” style=”shadow” border_width=”5″][/vc_column][/vc_row]

[vc_row][vc_column][vc_column_text]

Laboratory freezer

 

55-liter refrigerated steel chamber freezer

Refrigerator
Stainless steel inner chamber
Touch screen to adjust temperature and time
PLC control system
The outer body is made of painted iron sheet
With oc1±accuracy
– C° 40-to °C 70+ temperature range
Heating and cooling system

[/vc_column_text][vc_separator color=”juicy_pink” style=”shadow” border_width=”5″][/vc_column][/vc_row]

[vc_row][vc_column][vc_column_text]

Loi oxygen test

Model : LOI

Oxygen concentration range 0-100 %
Grading 10%
Accuracy ±2%
Response time less than 300 ms
Has HMI marking Delta
Delta brand Plc controller
Has flowmeter Mark Dwyer America
Oxygen flow stability time less than 6s
50 lit / s gas flow rate
Complies with ASTM D 2863 standard

[/vc_column_text][vc_separator color=”juicy_pink” style=”shadow” border_width=”5″][/vc_column][/vc_row]

[vc_row][vc_column][vc_column_text]

Cable Torsion Tester

Model : sctt-i

Test table with electrostatic paint
Motion and Angle Control
Has HMI
Testing method meets IEC 794-1e7 standard
Table length mm 1400
Rated weight according to IEC 794-1e7 standard
Has a number of spin counter
Ability to rotate both 180 ° and 360 °

[/vc_column_text][vc_separator color=”juicy_pink” style=”shadow” border_width=”5″][/vc_column][/vc_row]

[vc_row][vc_column][vc_column_text]

Cable Impact Tester

Model : SCIT

Compliant with ISIRI standard 5525-1-4
Different weight for testing (200, 300, 400 g)
Suitable for cable with diameter 12-22
Dimensions 50*40*20
Has 3 Hit stations at the same time
With weights calibration certificate
Ability to put into the sample preparation for testing
Compliant with IEC 60811-1-4 standard

[/vc_column_text][vc_separator color=”juicy_pink” style=”shadow” border_width=”5″][/vc_column][/vc_row]

[vc_row][vc_column][vc_column_text]

Cable Crash Tester

 

 

Performance meets standard, TIA /EIA-455-41 IEC 60794-1E3
Metal plate length 100 mm to squeeze the sample
Force measurement system by load cell
Control system by PLC
Use HP 5/0 motor for Gearbox pressure applying system
Software related to show force
Pressure exertion system by screw wing
Screw wings making country Taiwan
With the ability to apply force up to 1 ton with high precision
Step wing screw 10
System control by PLC
Adjustable speed for moving plate up to min / mm 100 with precision mm/min 1
Electric actuator

 [/vc_column_text][vc_separator color=”juicy_pink” style=”shadow” border_width=”5″][/vc_column][/vc_row]

[vc_row][vc_column][vc_column_text]

Cable Banding Tester

Model : scbt

Dimensions 25*27*30 (height*width*length )
Ability to measure the bending strength of cables at high temperatures
Ten shafts with the ability to test on cable mm 2 to 18.3
Has a speed of 12 RPM based on standard
Manual function
Compliant with STANDARDTIA-455 – 37 IEC 60794-E11 / E1A

[/vc_column_text][vc_separator color=”juicy_pink” style=”shadow” border_width=”5″][/vc_column][/vc_row]

[vc_row][vc_column][vc_column_text]

Cable Tensile Tester

Model : sctt

Has 2 reels-6 reels
Max diameter of sample 50 mm
Pulley diameter mm 800
8 pieces for inserting cable between pulleys
Screw wings
Plc controller
Force measurement by load cell
Protection for overload and height
Testing speed control by software and mechanical structure
Application
Ability to draw a graph of force and the amount of deformation in terms of time
Ability to store, retrieve, and print data

[/vc_column_text][vc_separator color=”juicy_pink” style=”shadow” border_width=”5″][/vc_column][/vc_row]

[vc_row][vc_column][vc_column_text]

Flame test meets standard

Model: STF

45 degree flame test
Body material stainless steel 4*3
Adjustable flame height – overall flame length 100mm (blue flame section length 50mm)
Possibility to hold the sample at an angle of 45 degrees
HMI to set Test start time
Ability to set the burning time and automatic stop testing
Safety thermocouple and display chamber in HMI
Has Alarm alarms after testing
Automatic ignition and automatic gas flow opening capability
Adjustable flame at specified angle
Glass and protective for sample viewing
Stainless steel body material
Compliant with IEC 60332-1-1 standard

[/vc_column_text][vc_separator color=”juicy_pink” style=”shadow” border_width=”5″][/vc_column][/vc_row]